Error
Request Form0
PRIMOFIT Compression Fittings
PRIMOFIT is a compression fitting made of malleable cast iron, which offers full end load capability. Additionally it allows an angular deviation of the connected pipes up to 3° per compression joint. It is available with black or hot dip galvanized surface. PRIMOFIT is suitable for the connection of steel pipes, PE pipes, lead pipes and special steel pipes.
Materials: White heart malleable cast iron (EN-GJMW-400-5)
Dimension range: DN10-DN80
Jointing technology: Compression joints, Rp/R threads (ISO/EN)
Operating pressure: Up to 16 bar
Operating temperature: -20°C to +105°C
Main Applications:
Materials: White heart malleable cast iron (EN-GJMW-400-5)
Dimension range: DN10-DN80
Jointing technology: Compression joints, Rp/R threads (ISO/EN)
Operating pressure: Up to 16 bar
Operating temperature: -20°C to +105°C
Main Applications:
- Building Technology
- Industrial applications
- Utility
- Cold Water
- Gas
- Oil
- Compressed Air
- Sprinkler Systems
- Repair & Extension
- Transitions (Steel to PE)
- Ready-to-install, pre-assembled fittings; dismantling is not required
- No special tools or skills required
- Modular system with spare packs for different applications
- End-load resistant (push and pull-out)
- Angular deviation of 3° per compression joint
| Brochure | ||||
|---|---|---|---|---|
| Primofit_Brochure.pdf | 579.97 KB | Download | ||
| Primofit_Broschüre.pdf | 572.29 KB | Download | ||
| Instruction Manual | ||||
| Primofit_Technical Handbook.pdf | 370.97 KB | Download | ||
| Primofit_Technisches Handbuch.pdf | 901.52 KB | Download | ||
| Product Catalog | ||||
| PRIMOFIT - Compression Fittings and Repair Systems 2015.pdf | 1.35 MB | Download | ||
