Reliable piping systems are essential for the safe transport of water, chemicals and gases. GF Piping Systems produces piping systems and system solutions for a wide range of applications across many different industries. The company’s systems and solutions are available in various materials and cover a broad spectrum of operating temperatures, dimensions and nominal pressures so customers can find the optimal solution for their needs.
The cemented ABS system is ideal for use at low temperatures, such as air-conditioning technology.
ALUPEX is a multilayer piping system that includes multilayer pipes and brass press fittings. It is suitable for drinking water applications and heating solutions.
ALUPEX GAS is an innovative piping system for gas installations in buildings. It includes a multilayer pipe and brass press fittings.
GF Aquasystem is made of high-quality PP-R and suitable for use in central heating systems, hot and cold water applications, potable water networks and compressed air systems.
The Contain-It secondary containment piping system comprises lightweight, clear PVC split pipes and fittings that are easy to fit over primary piping systems.
The CONTAIN-IT Plus piping system helps to minimize the risk to people and equipment in industrial applications while also fulfilling environmental regulations when transporting critical media.
A 3-in-1 piping system for chilled water, COOL-FIT 2.0 is a corrosion and condensation-free solution designed for a range of buildings and systems.
As a complete pre-insulated plastic piping system, COOL-FIT 4.0 from GF Piping Systems optimizes any commercial or industrial refrigeration set-up.
Double-See is fast and easy to install, and is available with a complete selection of pipes, fittings, termination fittings, closure couplings, leak detection and containment boxes.
The polyethylene piping system for use in a wide range of industrial applications, such as water, wastewater and a variety of chemical applications.
ELGEF Plus is the PE electrofusion system for pressurized piping systems. It is used for water, gas and multiple industrial applications.
The Fuseal® PP piping system is an easy and reliable solution for corrosive waste piping systems.
The Fuseal 25/50 PVDF (polyvinylidene fluoride) piping system is suitable for drain, waste and vent applications that are exposed to harsh thermal (hot), chemical and ultraviolet environments where flame and smoke considerations are necessary and a UL723/ASTM E84 Listing is required.
Fuseal Squared™ double containment piping is an ideal choice for corrosive waste conveyance systems where secondary containment is required or desired.
Revolutionizing sanitary automation processes and securing the safe supply of drinking water.
This local disinfection unit produces a sodium hypochlorite-based disinfectant to impede the spread of bacteria such as Legionella and Pseudomonas in drinking water systems.
iFIT is a push-fit system in dimensions of d16-32, connecting polybutene (PB) and multilayer composite (ML) pipes with PPSU and brass fittings using a unique modular adapter technology.
iJOINT compression fittings are specifically designed to enable the easy and safe connection of PE pipes to convey water for different applications, including drinking water supply, irrigation and mining.
The iKLIMA floor heating and cooling system is easy to install and provides high comfort coupled with maximum energy and cost efficiency.
iLITE is an axial press system with excellent flow rates thanks to the expansion of the pipe. The sleeves are already pre-assembled on the fitting and connected in a single-step procedure with just one tool.
The INSTAFLEX plastic pipeline system is ideally suited for applications in building technology, whether cold or hot water, cooling systems or compressed air lines.
JRG Sanipex is a plastic pipe-in-pipe drinking water system for water pocket-free connection at full flow. The PE-X pipes in the protective pipes can be easily replaced if necessary.
The JRG Sanipex MT drinking water installation system consists of cross-linked PE-X multilayer pipes and fittings produced using two-layer injection molding and the unique cone grip union technology.
The JRG Coral force limestone protection device for residential buildings is based on natural biomineralization, i.e., the controlled conversion of dissolved lime into smallest lime crystals.
GF JRG valves are successfully developed, designed and produced valves for building technology applications for more than 100 years.
Marine Grade™ CPVC is the ideal solution for white, black and grey water systems where improved fire performance properties are needed but the USCG listing is not required.
Marine PVC is the ideal solution for white, black and grey water systems where improved performance properties are needed but the IMO flame, smoke and toxicity requirements are not needed.
Malleable cast iron fittings are designed according to the EN 10242 standard and available in black and hot-dip galvanized versions. They are threaded according to EN 10226-1. The material ensures resistance against mechanical stress and long durability.
The MULTI/JOINT 3000 Plus system easily connects pipes from distribution and transport grids made of a wide variety of materials with a wide range of outside diameters.
Multi/Clamp stainless steel repair clamps are suitable for the repair and drilling of unpressurized or pressurized pipelines from 15 mm to 1,000 mm.
PRIMOFIT is a full end-load resistant compression fitting made of malleable cast iron, which is suitable for the connection of steel, PE and lead pipes with a black or hot-dip galvanized surface.
Ensuring the highest purity: PROGEF Natural combines the advantages of the PROGEF piping system made of weldable polypropylene with the purity requirements of the chemical and life sciences sectors.
PROGEF Plus, the weldable polypropylene piping system with excellent surface quality and minimized leach-out values, ensures maximum cleanliness and prevents contamination.
This highly resistant system offers numerous solutions for industrial applications from a broad spectrum of solution variants.
PPro-Seal™ Natural PP is a pure, durable and robust product that is easy to use, fast to install and has excellent chemical and corrosion resistance.
The cemented PVC-C System for applications in the temperature range of 0°C to 80°C.
The cemented PVC-U System with excellent properties in the temperature range of 0°C to 60°C.
The Schedule PVC 40 piping system exhibits exceptionally consistent quality with uniform properties, making it the preferred choice of installers and fabricators alike.
CPVC industrial pipes are produced on the basis of proven technical expertise and offer a tried-and-tested recipe for success in a world of constant technological change.
Schedule 80 PVC exhibits exceptionally consistent quality with uniform properties, making it the preferred choice of installers and fabricators alike.
The ChlorFIT® Schedule 80 piping system is the ideal choice for hot and cold supply water in both commercial and institutional projects.
SeaCor® is the first plastic piping system to obtain United States Coast Guard-type approval for white, black and grey water systems.
The SeaDrain® marine piping system is the first thermoplastic black and grey water drainage system to offer both welded and mechanical jointing capabilities.
Silenta Premium pipes with three-layer sound insulation for hot and cold as well as acidic liquids are suitable for the disposal of domestic wastewater.
The fittings are tailor-made for non-standard pipe diameters from DN400 to DN2200. The ST-System – the ideal solution for all your requirements.
The ECTFE system is the optimal solution for safe, efficient transport of highly concentrated media under high pressure and temperatures. The extremely good material resistance maximizes the system service life in the application.
The PVDF-HP system offers high mechanical and chemical resistance. Thanks to the unique production of all components under ISO Class 5 (100) cleanroom conditions and double packaging of all products, absolute purity is guaranteed right up to arrival at the customer's premises.
The PVDF system with individually packaged products is the reliable solution for challenging chemical and water applications. A wide range of fusion jointing technologies is available for every application.
UNI-Coupling makes pipe connection simple. Its patented components prevent leaks and ensure a reliable and durable connection.