MULTI/JOINT® 3080 Plus Wide Range
Spigot end, non restraint
For reliable restraint connections on all types of pipe materials. The MULTI/JOINT 3000 Plus wide range system meets the demands and is suitable for applications in water and gas for pipe sizes from DN50 up to and including DN600.
Model:
- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
Technical Details
DN (mm) | d3 (mm) | Range 1 (mm) | Measurements | CAD |
NBR / A2 Code | Quantity | Add to Cart | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 | 63 | 46 ‐ 71 | ![]() | ![]() | 709331210 | |||||||||
100 | 110 | 104 ‐ 132 | ![]() | ![]() | 709331216 | |||||||||
150 | 160 | 154 ‐ 192 | ![]() | ![]() | 709331220 | |||||||||
200 | 200 | 192 ‐ 232 | ![]() | ![]() | 709331229 |
DN (mm) | d3 (mm) | Range 1 (mm) | Measurements | CAD |
EPDM / A2 Code | Quantity | Add to Cart | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 | 63 | 46 ‐ 71 | ![]() | ![]() | 709331610 | |||||||||
100 | 110 | 104 ‐ 132 | ![]() | ![]() | 709331616 | |||||||||
150 | 160 | 154 ‐ 192 | ![]() | ![]() | 709331620 | |||||||||
200 | 200 | 192 ‐ 232 | ![]() | ![]() | 709331629 |
DN (mm) | d3 (mm) | Range 1 (mm) | Measurements | CAD |
NBR / A4 Code | Quantity | Add to Cart | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 | 63 | 46 ‐ 71 | ![]() | ![]() | 709331010 | |||||||||
100 | 110 | 104 ‐ 132 | ![]() | ![]() | 709331016 | |||||||||
150 | 160 | 154 ‐ 192 | ![]() | ![]() | 709331020 | |||||||||
200 | 200 | 192 ‐ 232 | ![]() | ![]() | 709331029 |
DN (mm) | d3 (mm) | Range 1 (mm) | Measurements | CAD |
EPDM / A4 Code | Quantity | Add to Cart | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 | 63 | 46 ‐ 71 | ![]() | ![]() | 709331310 | |||||||||
100 | 110 | 104 ‐ 132 | ![]() | ![]() | 709331316 | |||||||||
150 | 160 | 154 ‐ 192 | ![]() | ![]() | 709331320 | |||||||||
200 | 200 | 192 ‐ 232 | ![]() | ![]() | 709331329 |
- DN
(mm)50 - d3
(mm)63 - Range 1
(mm)46 ‐ 71 - NBR / A2
Code709331210 - a
(mm)204 ‐ 219 - b
(mm)164 - d
(mm)100 - e
(mm)3xM12 - L
(mm)75 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - d3
(mm)110 - Range 1
(mm)104 ‐ 132 - NBR / A2
Code709331216 - a
(mm)258 ‐ 277 - b
(mm)269 - d
(mm)110 - e
(mm)3xM16 - L
(mm)120 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - d3
(mm)160 - Range 1
(mm)154 ‐ 192 - NBR / A2
Code709331220 - a
(mm)289 ‐ 317 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - L
(mm)135 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - d3
(mm)200 - Range 1
(mm)192 ‐ 232 - NBR / A2
Code709331229 - a
(mm)335 ‐ 362 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - L
(mm)145 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)50 - d3
(mm)63 - Range 1
(mm)46 ‐ 71 - EPDM / A2
Code709331610 - a
(mm)204 ‐ 219 - b
(mm)164 - d
(mm)100 - e
(mm)3xM12 - L
(mm)75 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - d3
(mm)110 - Range 1
(mm)104 ‐ 132 - EPDM / A2
Code709331616 - a
(mm)258 ‐ 277 - b
(mm)269 - d
(mm)110 - e
(mm)3xM16 - L
(mm)120 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - d3
(mm)160 - Range 1
(mm)154 ‐ 192 - EPDM / A2
Code709331620 - a
(mm)289 ‐ 317 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - L
(mm)135 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - d3
(mm)200 - Range 1
(mm)192 ‐ 232 - EPDM / A2
Code709331629 - a
(mm)335 ‐ 362 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - L
(mm)145 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)50 - d3
(mm)63 - Range 1
(mm)46 ‐ 71 - NBR / A4
Code709331010 - a
(mm)204 ‐ 219 - b
(mm)164 - d
(mm)100 - e
(mm)3xM12 - L
(mm)75 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - d3
(mm)110 - Range 1
(mm)104 ‐ 132 - NBR / A4
Code709331016 - a
(mm)258 ‐ 277 - b
(mm)269 - d
(mm)110 - e
(mm)3xM16 - L
(mm)120 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - d3
(mm)160 - Range 1
(mm)154 ‐ 192 - NBR / A4
Code709331020 - a
(mm)289 ‐ 317 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - L
(mm)135 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - d3
(mm)200 - Range 1
(mm)192 ‐ 232 - NBR / A4
Code709331029 - a
(mm)335 ‐ 362 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - L
(mm)145 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)50 - d3
(mm)63 - Range 1
(mm)46 ‐ 71 - EPDM / A4
Code709331310 - a
(mm)204 ‐ 219 - b
(mm)164 - d
(mm)100 - e
(mm)3xM12 - L
(mm)75 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - d3
(mm)110 - Range 1
(mm)104 ‐ 132 - EPDM / A4
Code709331316 - a
(mm)258 ‐ 277 - b
(mm)269 - d
(mm)110 - e
(mm)3xM16 - L
(mm)120 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - d3
(mm)160 - Range 1
(mm)154 ‐ 192 - EPDM / A4
Code709331320 - a
(mm)289 ‐ 317 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - L
(mm)135 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - d3
(mm)200 - Range 1
(mm)192 ‐ 232 - EPDM / A4
Code709331329 - a
(mm)335 ‐ 362 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - L
(mm)145 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
Features
Advantages:- reduce stock
- complete program
- reduce installation time
- increase reliability
- environment-friendly
- save time in ordering and warehouse handling
Fields of Application:
- Transport lines
- Hydrants
- Pump stations
- Maintenance & repair
- Water & gas distribution lines
- Service lines
Documents
Brochure | ||||
---|---|---|---|---|
EN Brochure MJ 3000 Plus DN425 - DN600 2016.pdf | 1.26 MB | Download | ||
EN Brochure MJ 3000 Plus 2019.pdf | 5.66 MB | Download | ||
Instruction Manual | ||||
User Manual MJ DN50-DN400 2019.pdf | 7.75 MB | Download | ||
User Manual MJ DN425-DN600 2018.pdf | 21.09 MB | Download |