MULTI/JOINT® 3000 Plus Wide Range
Coupling, non restraint
For reliable restraint connections on all types of pipe materials. The MULTI/JOINT 3000 Plus wide range system meets the demands and is suitable for applications in water and gas for pipe sizes from DN50 up to and including DN600.
Model:
- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
Technical Details
- DN
(mm)50 - Range 1
(mm)46 ‐ 71 - Range 3
(mm)46 ‐ 71 - NBR / A2
Code709301210 - a
(mm)209 ‐ 233 - b
(mm)164 - d
(mm)95 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)65 - Range 1
(mm)63 ‐ 90 - Range 3
(mm)63 ‐ 90 - NBR / A2
Code709301212 - a
(mm)220 ‐ 250 - b
(mm)186 - d
(mm)100 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)80 - Range 1
(mm)84 ‐ 105 - Range 3
(mm)84 ‐ 105 - NBR / A2
Code709301214 - a
(mm)234 ‐ 262 - b
(mm)204 - d
(mm)115 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - Range 1
(mm)104 ‐ 132 - Range 3
(mm)104 ‐ 132 - NBR / A2
Code709301216 - a
(mm)230 ‐ 268 - b
(mm)236 - d
(mm)110 - e
(mm)3xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)125 - Range 1
(mm)132 ‐ 155 - Range 3
(mm)132 ‐ 155 - NBR / A2
Code709301218 - a
(mm)246 ‐ 282 - b
(mm)264 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - Range 1
(mm)154 ‐ 192 - Range 3
(mm)154 ‐ 192 - NBR / A2
Code709301220 - a
(mm)242 ‐ 298 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - Range 1
(mm)192 ‐ 232 - Range 3
(mm)192 ‐ 232 - NBR / A2
Code709301224 - a
(mm)297 ‐ 351 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)225 - Range 1
(mm)230 ‐ 268 - Range 3
(mm)230 ‐ 268 - NBR / A2
Code709301226 - a
(mm)342 ‐ 404 - b
(mm)386 - d
(mm)145 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)250 - Range 1
(mm)267 ‐ 310 - Range 3
(mm)267 ‐ 310 - NBR / A2
Code709301228 - a
(mm)354 ‐ 424 - b
(mm)432 - d
(mm)170 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)300 - Range 1
(mm)315 ‐ 356 - Range 3
(mm)315 ‐ 356 - NBR / A2
Code709301232 - a
(mm)384 ‐ 460 - b
(mm)495 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)350 - Range 1
(mm)352 ‐ 393 - Range 3
(mm)352 ‐ 393 - NBR / A2
Code709301236 - a
(mm)384 ‐ 460 - b
(mm)533 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)400 - Range 1
(mm)392 ‐ 433 - Range 3
(mm)392 ‐ 433 - NBR / A2
Code709301240 - a
(mm)384 ‐ 460 - b
(mm)570 - d
(mm)224 - e
(mm)10xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)425 - Range 1
(mm)432 ‐ 464 - Range 3
(mm)432 ‐ 464 - NBR / A2
Code709301242 - a
(mm)530 ‐ 580 - b
(mm)623 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)450 - Range 1
(mm)450 ‐ 482 - Range 3
(mm)450 ‐ 482 - NBR / A2
Code709301272 - a
(mm)530 ‐ 580 - b
(mm)641 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)475 - Range 1
(mm)481 ‐ 513 - Range 3
(mm)481 ‐ 513 - NBR / A2
Code709301273 - a
(mm)530 ‐ 580 - b
(mm)672 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)500 - Range 1
(mm)500 ‐ 532 - Range 3
(mm)500 ‐ 532 - NBR / A2
Code709301274 - a
(mm)530 ‐ 580 - b
(mm)691 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)550 - Range 1
(mm)548 ‐ 580 - Range 3
(mm)548 ‐ 580 - NBR / A2
Code709301276 - a
(mm)530 ‐ 580 - b
(mm)739 - d
(mm)275 - e
(mm)12xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)600 - Range 1
(mm)605 ‐ 637 - Range 3
(mm)605 ‐ 637 - NBR / A2
Code709301278 - a
(mm)530 ‐ 580 - b
(mm)796 - d
(mm)275 - e
(mm)14xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)50 - Range 1
(mm)46 ‐ 71 - Range 3
(mm)46 ‐ 71 - EPDM / A2
Code709301610 - a
(mm)209 ‐ 233 - b
(mm)164 - d
(mm)95 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)65 - Range 1
(mm)63 ‐ 90 - Range 3
(mm)63 ‐ 90 - EPDM / A2
Code709301612 - a
(mm)220 ‐ 250 - b
(mm)186 - d
(mm)100 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)80 - Range 1
(mm)84 ‐ 105 - Range 3
(mm)84 ‐ 105 - EPDM / A2
Code709301614 - a
(mm)234 ‐ 262 - b
(mm)204 - d
(mm)115 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - Range 1
(mm)104 ‐ 132 - Range 3
(mm)104 ‐ 132 - EPDM / A2
Code709301616 - a
(mm)230 ‐ 268 - b
(mm)236 - d
(mm)110 - e
(mm)3xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)125 - Range 1
(mm)132 ‐ 155 - Range 3
(mm)132 ‐ 155 - EPDM / A2
Code709301618 - a
(mm)246 ‐ 282 - b
(mm)264 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - Range 1
(mm)154 ‐ 192 - Range 3
(mm)154 ‐ 192 - EPDM / A2
Code709301620 - a
(mm)242 ‐ 298 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - Range 1
(mm)192 ‐ 232 - Range 3
(mm)192 ‐ 232 - EPDM / A2
Code709301624 - a
(mm)297 ‐ 351 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)225 - Range 1
(mm)230 ‐ 268 - Range 3
(mm)230 ‐ 268 - EPDM / A2
Code709301626 - a
(mm)342 ‐ 404 - b
(mm)386 - d
(mm)145 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)250 - Range 1
(mm)267 ‐ 310 - Range 3
(mm)267 ‐ 310 - EPDM / A2
Code709301628 - a
(mm)354 ‐ 424 - b
(mm)432 - d
(mm)170 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)300 - Range 1
(mm)315 ‐ 356 - Range 3
(mm)315 ‐ 356 - EPDM / A2
Code709301632 - a
(mm)384 ‐ 460 - b
(mm)495 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)350 - Range 1
(mm)352 ‐ 393 - Range 3
(mm)352 ‐ 393 - EPDM / A2
Code709301636 - a
(mm)384 ‐ 460 - b
(mm)533 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)400 - Range 1
(mm)392 ‐ 433 - Range 3
(mm)392 ‐ 433 - EPDM / A2
Code709301640 - a
(mm)384 ‐ 460 - b
(mm)570 - d
(mm)224 - e
(mm)10xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)425 - Range 1
(mm)432 ‐ 464 - Range 3
(mm)432 ‐ 464 - EPDM / A2
Code709301642 - a
(mm)530 ‐ 580 - b
(mm)623 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)450 - Range 1
(mm)450 ‐ 482 - Range 3
(mm)450 ‐ 482 - EPDM / A2
Code709301672 - a
(mm)530 ‐ 580 - b
(mm)641 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)475 - Range 1
(mm)481 ‐ 513 - Range 3
(mm)481 ‐ 513 - EPDM / A2
Code709301673 - a
(mm)530 ‐ 580 - b
(mm)672 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)500 - Range 1
(mm)500 ‐ 532 - Range 3
(mm)500 ‐ 532 - EPDM / A2
Code709301674 - a
(mm)530 ‐ 580 - b
(mm)691 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)550 - Range 1
(mm)548 ‐ 580 - Range 3
(mm)548 ‐ 580 - EPDM / A2
Code709301676 - a
(mm)530 ‐ 580 - b
(mm)739 - d
(mm)275 - e
(mm)12xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)600 - Range 1
(mm)605 ‐ 637 - Range 3
(mm)605 ‐ 637 - EPDM / A2
Code709301678 - a
(mm)530 ‐ 580 - b
(mm)796 - d
(mm)275 - e
(mm)14xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)50 - Range 1
(mm)46 ‐ 71 - Range 3
(mm)46 ‐ 71 - NBR / A4
Code709301010 - a
(mm)209 ‐ 233 - b
(mm)164 - d
(mm)95 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)65 - Range 1
(mm)63 ‐ 90 - Range 3
(mm)63 ‐ 90 - NBR / A4
Code709301012 - a
(mm)220 ‐ 250 - b
(mm)186 - d
(mm)100 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)80 - Range 1
(mm)84 ‐ 105 - Range 3
(mm)84 ‐ 105 - NBR / A4
Code709301014 - a
(mm)234 ‐ 262 - b
(mm)204 - d
(mm)115 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - Range 1
(mm)104 ‐ 132 - Range 3
(mm)104 ‐ 132 - NBR / A4
Code709301016 - a
(mm)230 ‐ 268 - b
(mm)236 - d
(mm)110 - e
(mm)3xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)125 - Range 1
(mm)132 ‐ 155 - Range 3
(mm)132 ‐ 155 - NBR / A4
Code709301018 - a
(mm)246 ‐ 282 - b
(mm)264 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - Range 1
(mm)154 ‐ 192 - Range 3
(mm)154 ‐ 192 - NBR / A4
Code709301020 - a
(mm)242 ‐ 298 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - Range 1
(mm)192 ‐ 232 - Range 3
(mm)192 ‐ 232 - NBR / A4
Code709301024 - a
(mm)297 ‐ 351 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)225 - Range 1
(mm)230 ‐ 268 - Range 3
(mm)230 ‐ 268 - NBR / A4
Code709301026 - a
(mm)342 ‐ 404 - b
(mm)386 - d
(mm)145 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)250 - Range 1
(mm)267 ‐ 310 - Range 3
(mm)267 ‐ 310 - NBR / A4
Code709301028 - a
(mm)354 ‐ 424 - b
(mm)432 - d
(mm)170 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)300 - Range 1
(mm)315 ‐ 356 - Range 3
(mm)315 ‐ 356 - NBR / A4
Code709301032 - a
(mm)384 ‐ 460 - b
(mm)495 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)350 - Range 1
(mm)352 ‐ 393 - Range 3
(mm)352 ‐ 393 - NBR / A4
Code709301036 - a
(mm)384 ‐ 460 - b
(mm)533 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)400 - Range 1
(mm)392 ‐ 433 - Range 3
(mm)392 ‐ 433 - NBR / A4
Code709301040 - a
(mm)384 ‐ 460 - b
(mm)570 - d
(mm)224 - e
(mm)10xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)425 - Range 1
(mm)432 ‐ 464 - Range 3
(mm)432 ‐ 464 - NBR / A4
Code709301042 - a
(mm)530 ‐ 580 - b
(mm)623 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)450 - Range 1
(mm)450 ‐ 482 - Range 3
(mm)450 ‐ 482 - NBR / A4
Code709301072 - a
(mm)530 ‐ 580 - b
(mm)641 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)475 - Range 1
(mm)481 ‐ 513 - Range 3
(mm)481 ‐ 513 - NBR / A4
Code709301073 - a
(mm)530 ‐ 580 - b
(mm)672 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)500 - Range 1
(mm)500 ‐ 532 - Range 3
(mm)500 ‐ 532 - NBR / A4
Code709301074 - a
(mm)530 ‐ 580 - b
(mm)691 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)550 - Range 1
(mm)548 ‐ 580 - Range 3
(mm)548 ‐ 580 - NBR / A4
Code709301076 - a
(mm)530 ‐ 580 - b
(mm)739 - d
(mm)275 - e
(mm)12xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)600 - Range 1
(mm)605 ‐ 637 - Range 3
(mm)605 ‐ 637 - NBR / A4
Code709301078 - a
(mm)530 ‐ 580 - b
(mm)796 - d
(mm)275 - e
(mm)14xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)50 - Range 1
(mm)46 ‐ 71 - Range 3
(mm)46 ‐ 71 - EPDM / A4
Code709301310 - a
(mm)209 ‐ 233 - b
(mm)164 - d
(mm)95 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)65 - Range 1
(mm)63 ‐ 90 - Range 3
(mm)63 ‐ 90 - EPDM / A4
Code709301312 - a
(mm)220 ‐ 250 - b
(mm)186 - d
(mm)100 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)80 - Range 1
(mm)84 ‐ 105 - Range 3
(mm)84 ‐ 105 - EPDM / A4
Code709301314 - a
(mm)234 ‐ 262 - b
(mm)204 - d
(mm)115 - e
(mm)3xM12 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)100 - Range 1
(mm)104 ‐ 132 - Range 3
(mm)104 ‐ 132 - EPDM / A4
Code709301316 - a
(mm)230 ‐ 268 - b
(mm)236 - d
(mm)110 - e
(mm)3xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)125 - Range 1
(mm)132 ‐ 155 - Range 3
(mm)132 ‐ 155 - EPDM / A4
Code709301318 - a
(mm)246 ‐ 282 - b
(mm)264 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)150 - Range 1
(mm)154 ‐ 192 - Range 3
(mm)154 ‐ 192 - EPDM / A4
Code709301320 - a
(mm)242 ‐ 298 - b
(mm)304 - d
(mm)120 - e
(mm)4xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)200 - Range 1
(mm)192 ‐ 232 - Range 3
(mm)192 ‐ 232 - EPDM / A4
Code709301324 - a
(mm)297 ‐ 351 - b
(mm)354 - d
(mm)140 - e
(mm)6xM16 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)225 - Range 1
(mm)230 ‐ 268 - Range 3
(mm)230 ‐ 268 - EPDM / A4
Code709301326 - a
(mm)342 ‐ 404 - b
(mm)386 - d
(mm)145 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)250 - Range 1
(mm)267 ‐ 310 - Range 3
(mm)267 ‐ 310 - EPDM / A4
Code709301328 - a
(mm)354 ‐ 424 - b
(mm)432 - d
(mm)170 - e
(mm)6xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)300 - Range 1
(mm)315 ‐ 356 - Range 3
(mm)315 ‐ 356 - EPDM / A4
Code709301332 - a
(mm)384 ‐ 460 - b
(mm)495 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)350 - Range 1
(mm)352 ‐ 393 - Range 3
(mm)352 ‐ 393 - EPDM / A4
Code709301336 - a
(mm)384 ‐ 460 - b
(mm)533 - d
(mm)224 - e
(mm)8xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)400 - Range 1
(mm)392 ‐ 433 - Range 3
(mm)392 ‐ 433 - EPDM / A4
Code709301340 - a
(mm)384 ‐ 460 - b
(mm)570 - d
(mm)224 - e
(mm)10xM20 - PN Water
(bar)25 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)425 - Range 1
(mm)432 ‐ 464 - Range 3
(mm)432 ‐ 464 - EPDM / A4
Code709301342 - a
(mm)530 ‐ 580 - b
(mm)623 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)450 - Range 1
(mm)450 ‐ 482 - Range 3
(mm)450 ‐ 482 - EPDM / A4
Code709301372 - a
(mm)530 ‐ 580 - b
(mm)641 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)475 - Range 1
(mm)481 ‐ 513 - Range 3
(mm)481 ‐ 513 - EPDM / A4
Code709301373 - a
(mm)530 ‐ 580 - b
(mm)672 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)500 - Range 1
(mm)500 ‐ 532 - Range 3
(mm)500 ‐ 532 - EPDM / A4
Code709301374 - a
(mm)530 ‐ 580 - b
(mm)691 - d
(mm)275 - e
(mm)10xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)550 - Range 1
(mm)548 ‐ 580 - Range 3
(mm)548 ‐ 580 - EPDM / A4
Code709301376 - a
(mm)530 ‐ 580 - b
(mm)739 - d
(mm)275 - e
(mm)12xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
- DN
(mm)600 - Range 1
(mm)605 ‐ 637 - Range 3
(mm)605 ‐ 637 - EPDM / A4
Code709301378 - a
(mm)530 ‐ 580 - b
(mm)796 - d
(mm)275 - e
(mm)14xM20 - PN Water
(bar)16 - MOP Gas
(bar)8

- Suitable for all kinds of pipe material
- Suitable for water and gas
Ductile cast iron GGG45 body and clamping ring(s), acc. to EN-GJS-450-10
- RESICOAT® epoxy powder coating, according to GSK standards and EN 14901
- NBR or EPDM gasket, NBR acc. to EN 682 (-5°C up to +50°C), EPDM acc. to EN 681-1 (0°C up to +50ºC)
Angular deflection of max. 8° per socket at installation (based on the middle of the range)
Stainless steel A2 quality (AISI 304) or A4 quality (AISI 316) bolts, nuts and washers
- For all plastic pipes, the use of an insert stiffener (see accessories) is recommended and in some cases mandatory. Check our technical information.
- Hygiene protection included DN50 - DN600
Features
Advantages:- reduce stock
- complete program
- reduce installation time
- increase reliability
- environment-friendly
- save time in ordering and warehouse handling
Fields of Application:
- Transport lines
- Hydrants
- Pump stations
- Maintenance & repair
- Water & gas distribution lines
- Service lines
Documents
Brochure | ||||
---|---|---|---|---|
EN Brochure MJ 3000 Plus DN425 - DN600 2016.pdf | 1.26 MB | Download | ||
EN Brochure MJ 3000 Plus 2019.pdf | 5.66 MB | Download | ||
Instruction Manual | ||||
User Manual MJ DN50-DN400 2019.pdf | 7.75 MB | Download | ||
User Manual MJ DN425-DN600 2018.pdf | 21.09 MB | Download |