COOL-FIT PE Plus

COOL-FIT®️ PE Plus is a pre-insulated plastic piping system that is reliable and efficient solution for chilled water and other chilled liquids. The system is maintenance-free, easy to install, and will not corrode over time. Since the insulation on both the fittings and pipe is bonded together at the factory, no condensation can form between the vapor barrier. The weight is a fraction of metal solutions allowing it to be roof-mounted in locations that may be problematic for other systems. Unlike other plastic piping systems, COOL-FIT®️ PE Plus is designed to handle temperature as low as -58 °F. The high thermal conductivity properties of the system and vapor barrier seal are incredibly efficient and have resulted in energy savings in several projects.

Safe, efficient cooling has never been easier

COOL-FIT® PE Plus is the next generation pre-insulated plastic piping system from Georg Fischer for the conveyance of chilled water, glycol and brine. This energy efficient system utilizes the robust HDPE material for the carrier pipe. Since the insulation on both the fittings and pipe are bonded together at the factory, no condensation can build between the two. The system is maintenance free, easy to install, and will not corrode over time. The weight is a fraction of metal solutions allowing it to be roof mounted in locations that may be problematic for other systems. Installation procedures can be learned in hours.

The system is a fully pre-insulated piping solution. This includes fittings, valves, and pipe. Installers often report as much as a 50% labor savings. The end result is a system that has a clean look and will provide years of maintenance free operation.

cool fit pe plus
Documents Download

Overview

Technical Data

Size Range:

  • 1" - 18" (d32-d450)

Pressure Rating:

  • 150 PSI SDR 17 (6" - 18")
  • 232 PSI SDR 11 (1" - 4")

Operating Temperature:

  • -58°F to 140°F (-50°C to 60°C)

Joining Technology:

  • Electrofusion

Standard Rating:

  • ISO: 15494, 16135, 16136, 16137, 16871

Materials:

  • Carrier Pipe: GF PE100 HDPE
  • Outer Jacket: Fittings are PUR
  • Foam Insulation: Polyurethane (PUR)

Fields of Applications

  • Breweries & Wineries
  • Food Processing
  • Cold Stores
  • Supermarkets and Dairies
  • Hospitals
  • Multi-Use Buildings
  • Hotels
  • Bakeries

Advantages

  • Simple and cost-effective installation; reduced costs for pipe hanging
  • Light weight
  • Maintenance-free, no corrosion
  • Efficient, energy savings
  • Environmentally friendly
  • High impact resistance, even at very low temperatures
  • Suitable for outdoor applications: UV and Weathering Resistant
  • Water and vapor tight

Your Benefits

100% Maintenance-Free

Fully plastic media pipe—corrosion and scaling free. UV resistant and corrosion-free jacket pipe. Pre- insulated with closed cell insulation attached to both media and jacket pipes. Fully vaportight system that can be power washed—no degradation of insulation due to water uptake.

65% Less Weight

Fully plastic media pipe—corrosion and scaling free. UV resistant and corrosion-free jacket pipe. Pre- insulated with closed cell insulation attached to both media and jacket pipes. Fully vaportight system that can be power washed—no degradation of insulation due to water uptake.

50% Quicker Installation

Fully plastic media pipe—corrosion and scaling free. UV resistant and corrosion-free jacket pipe. Pre- insulated with closed cell insulation attached to both media and jacket pipes. Fully vaportight system that can be power washed—no degradation of insulation due to water uptake.

30% Higher Energy Efficiency

Fully plastic media pipe—corrosion and scaling free. UV resistant and corrosion-free jacket pipe. Pre- insulated with closed cell insulation attached to both media and jacket pipes. Fully vaportight system that can be power washed—no degradation of insulation due to water uptake.


Product Features

Pre-Insulated Pipes for Fast Installation

coolfit-pe-plus-pre-insulated-pipes-for-fast-installation

No post insulation steps are necessary with the COOL-FIT®️ PE Plus system result in significant time savings. Additionally, the lightweight makes moving pipe and fittings around the job sites easier, safer, and faster.

Uncomplicated Flange Connections

coolfit-pe-plus-uncomplicated-flange-connections

Connection to existing metal systems is simple with the use of flange connections. The COOL-FIT®️ PE Plus range includes ANSI 150# flange adaptors and a matching insulation kit for a clean, consistent install.

Wide Range of Pre-Insulated Electrofusion Fittings

coolfit-pe-plus-wide-range-of-pre-insulated-electrofusion-fittings

The offering of COOL-FIT®️ PE Plus fittings includes elbows, tees, couplers, and reducers. Electrofusion ensures permanent joints in just a few minutes.

Instrument Fittings for Sensors

coolfit-pe-plus-instrument-fittings-for-sensors

Sensors for measuring pressure, temperature, and other parameters can be easily integrated with our threaded instrument fittings.

Valves

coolfit-pe-plus-valves

Both ball and butterfly valves are available in the COOL-FIT®️ PE Plus system. Easy to use insulation kits are available and have options for electric and pneumatic actuation.

Easy Transitions to Metal Systems

coolfit-pe-plus-easy-transitions-to-metal-systems

The COOL-FIT®️ PE Plus adapter fittings enable simple transitions to metal connections, allowing for effortless solutions to adjacent systems.

Tools and Training

coolfit-pe-plus-tools-and-training

GF Piping Systems offers a complete range of tools for purchase or rent and provides factory certified training to ensure proper procedures are understood and followed.