Select the required valve type and pipe size and enter your process parameters. Then you can choose between different valve sizes. If the working range of the selected valve is optimal, you will see it, marked by two red lines, in the green area of the diagram. If not, please correct accordingly:
- If the opening angle is in the front orange section (“vibration”), select a smaller valve size.
- If the opening angle is in the back orange section (“cavitation”), select a bigger valve size.
- If there is no red line in the graph, please check if the flow rate is within the range of the selected valve.
If you are not sure about the exact value of inlet pressure (P1) and outlet pressure (P2), we suggest to start with ΔP = 1 bar / 14.5 psi (ΔP = P1-P2).