COOL-FIT PE Plus is a cutting-edge technology, designed for use in commercial and industrial refrigeration installations. It pairs corrosion and maintenance-free components with ex-works pre-insulation in a system that is reliable and efficient. Safe, lightweight and quick to install, this system is ideally suited for fruit and vegetable processors, slaughterhouses, and breweries. With COOL-FIT PE Plus, users can operate with maximum efficiency and no interruptions while minimizing maintenance and operating costs.
- d32-d450 (1" - 18")
- 150 PSI SDR 17
- -58°F to 140°F (-50°C to 60°C)
- Carrier Pipe: GF PE100 HDPE
- Outer Jacket Pipe: GF PE100 HDPE
- Outer Jacket Fittings: Polyurethane Low Density(PUR)
- Foam Insulation: Polyurethane High Density(PUR)
The plastic design eliminates the risk of corrosion and smooth inner surfaces prevent deposits, making the system virtually maintenance-free and as efficient as it was on its first day of operation.
Much lighter than metal piping systems, COOL-FIT PE Plus lowers structural demands on buildings and supporting structures while reducing the need for heavy and expensive transport aids.
Consisting of pre-insulated components that require no extra modifications, COOL-FIT PE Plus takes advantage of electrofusion installation to allow for rapid set-up.
The low thermal conductivity of the plastic paired with the highly efficient foam increase the system’s energy efficiency, which in turn cuts energy costs.
Easy to join and install, lightweight pre-insulated pipes help to minimize energy loss and reduce running costs over the long-term. Insulated with efficient, high-energy foam, pre-insulated pipes are ideal for both new constructions and retrofitting.
Adapters and transitions are essential for connecting metal with plastic pipes or even two plastic pipes. This range covers multiple materials and offers reliable connections while offering high flexibility during assembly.
Bends and elbows are essential fittings that easily change the direction of pipes. The extensive range available offers not only multiple materials but also different curvature degrees to easily fit your piping system.
Simplify the pipe installation process with couplers and sockets. Specially designed to slide easily over pipes with no extra equipment required, they are cemented, welded or mechanically connected to create a pressure-tight joint.
Flange connections are often the best mechanical connection between pipe segments or for installing valves up to very big dimensions.
GF Piping Systems has an extensive range of installation fittings available in a wide range of materials, ensuring secure and accurate positioning of sensors and electrodes for exceptional performance. The fittings match perfectly with all GF Signet products and are key for the easy installation of measurement equipment.
Reducers are used for effecting a smooth transition between two pipes or fittings with different dimensions. The wide selection available covers an exceptionally diverse area of applications. They are available in short or long versions and in centric or excentric versions.
When creating branch lines, lightweight tee, wye, and cross fittings make installation much easier. These fittings are made from a range of materials and malleable iron and cover multiple dimension possibilities including various reductions on the same fitting.
The new generation with standard lockable lever, data matrix code and modular design guarantees long-term sustainability. The Ball Valve 546 Pro meets every challenge and application, including simple water applications or complicated processes in the chemical industry, microelectronics or food and beverage industry.
The Ball Valve type 543 is the ideal valve for all mixing and distribution processes, including redirecting, mixing, distributing or even shutting off a medium in areas of application within the chemical process industry, microelectronics or water applications.
Intended for use in numerous applications from chemical processing to water treatment, GF Piping System offers a wide range of diaphragm valves. This includes manual, pneumatic and electric operation combined with all plastic and diaphragm materials.
GF Piping Systems Type 578 butterfly valves with high corrosion resistance are perfect for use in chemical processing and industrial water treatment. Their versatile design minimizes torque and allows them to be used as a wafer-style or lug-style valve.
A modular design and an intelligent yet simple operating principle make the GF Piping Systems Type 567 butterfly valve the perfect addition to any set-up. This wafer-style butterfly valve is made of highly durable, corrosion-resistant plastic and can be installed with ease.
Plastic Butterfly Valves have already proven to outperform metal valves in almost every way, thanks to a higher resistance against corrosion and a lighter weight. Now, a new generation has arrived to beat metal in cost-effectiveness, too.
The Cone Check Valve 561/562 is designed to prevent the backflow of media into sensitive systems. This valve minimizes pressure loss and comes with a special seal to guarantee leakproof operation.
Designed to protect sensitive components in piping systems, strainers filter out pollutants from the media. This extends the system’s service life, reduces maintenance, improves operation and minimizes additional expenditure.
Robust, lightweight and practical, the MSA 2 series features a barcode scanner, a cooling system for multiple jointing operations and ample internal memory for storing records. An intuitive interface gives the operator a clear overview at all times.
Simple to operate and featuring a robust aluminum housing, the MSA 315, 330 and 340 electrofusion units control the entire welding process taking into account energy output compensation. These units also have sufficient internal memory to store up to 1,000 jointing records.
Designed for stress-free installation with minimal movement during the welding and cooling process, these tools can be clamped into position with ease. The GF Piping Systems range includes multiple innovative variants for maximum practicality.
GF Piping Systems takes the hassle out of peeling and chamfering. Easy to use peeling tools ensure consistent peeling quality when preparing pipesurfaces while chamfering tools are designed to chamfer pipes of various diameters in no time at all.
Original, high-quality spares parts for GF Piping Systems systems and products. Spare parts are available throughout the lifecycle of your system and available in an agreed timeframe.
We provide a wide range of accessories to support your installation projects. Accessories are available for use throughout the life-cycle of your system and available in an agreed time-frame.
Thanks to continued innovation efforts, we are continually improving and refining our products and systems. Due to this, some fittings are no longer being manufactured. If you are unsure if a product line you currently own is discontinued, or are looking for support or further information on one of our discontinued product lines, please find our contact information below.
Thanks to continued innovation efforts, we are continually improving and refining our products and systems. Due to this, some valves and actuators are no longer being manufactured. If you are unsure if a product line you currently own is discontinued, or are looking for support or further information on one of our discontinued product lines, please find our contact information below.