FlowGuard Gold® CTS CPVC Pipe

flowguard-330x240

 GF Harvel FlowGuard Gold® CTS (Copper Tube Size) Plumbing Pipe, manufactured with FlowGuard Gold® compounds, provides exceptional corrosion resistance for hot and cold water plumbing applications. Easily installed using reliable solvent-welded joining techniques, GF Harvel® FlowGuard Gold® CTS CPVC pipe is the quality, cost-effective choice for long-term system service.

GF Harvel® FlowGuard Gold® CTS CPVC hot and cold water plumbing pipe is manufactured in strict compliance with ASTM D2846. This standard defines requirements for materials, workmanship, dimensions, tolerances, pressure-bearing capability, and thermocycling resistance. GF Harvel® FlowGuard Gold® plumbing pipe is manufactured to SDR 11 specifications in accordance with this standard. With SDR series pipe, the outside-diameter-to-wall- thickness ratio is constant regardless of pipe diameter; therefore all sizes of pipe carry the same pressure rating.


Product Overview

Technical Data:

Size Range:

  • ½" - 2"

Pressure Rating:

  • 400 PSI @ 72°F (23°C)
  • 100 PSI @ 180°F (82°C)

Temperature Rating:

  • 32°F - 73°F (400 PSI)
  • 32°F - 180°F (100 PSI)

Joining Technology:

  • Solvent (Cement) Weld

Standard Ratings:

  • ASTM D1784
  • ASTM D2846
  • NSF/ANSI 14
  • NSF/ANSI 61
  • ULC S102.2
  • CSA B137.6

Material:

  • Chlorinated Polyvinyl Chloride (CPVC)

Fields of Application:

  • Residential water distribution systems

Advantages:

  • Provides exceptional corrosion resistance for hot and cold water plumbing applications
  • Easy installation
  • Quality cost-effective choice for long-term system service

Specifications

FlowGuard

  1. All CPVC SDR 11 Series hot and cold water plumbing pipe shall be manufactured from a Type IV, Grade I Chlorinated Polyvinyl Chloride (CPVC) compound with a Cell Classification of 24448 (CPVC4120) per ASTM D1784. The pipe shall be manufactured in strict compliance to ASTM D2846, consistently meeting and/or exceeding the quality assurance test requirements of this standard with regard to pressure rating, material, workmanship, burst pressure, flattening resistance, and extrusion quality. The pipe shall be manufactured in the USA by an ISO 9001 certified manufacturer. All pipe shall be packaged on-line immediately after its manufacture and stored indoors after production at the manufacturing site until shipped from factory. This pipe shall carry the National Sanitation Foundation (NSF) seal of approval for potable water applications. The pipe shall have a flame spread rating <25 and a smoke development rating <50 when tested and listed for surface burning characteristics in accordance with ULC-S102.2 or equivalent; this information shall be printed on the pipe along with the mark of the listing agency. This pipe shall also meet the requirements of CSA B137.6 for CPVC hot and cold water distribution piping. All pipe shall be manufactured by GF Harvel., Inc, trade name GF Harvel® FlowGuard Gold® CTS CPVC.

Dimensions, Pressure & Deratings

GF Harvel® FlowGuard Gold® CTS CPVC hot and cold water plumbing pipe is manufactured in strict compliance with ASTM D2846. This standard defines requirements for materials, workmanship, dimensions, tolerances, pressure-bearing capability, and thermocycling resistance. GF Harvel® FlowGuard Gold® plumbing pipe is manufactured to SDR 11 specifications in accordance with this standard. With SDR series pipe, the outside-diameter-to-wall- thickness ratio is constant regardless of pipe diameter; therefore all sizes of pipe carry the same pressure rating.

Nominal Pipe Size Avg. O.D. O.D. TOL Avg. I.D. Min Wall Wall TOL Pressure Rating @
73°F 180°F
1/2 0.625 ±.003 0.469 0.060 ±0.020 400 100
3/4 0.875 ±.003 0.695 0.080 ±0.020 400 100
1 1.125 ±.003 0.901 0.102 ±0.020 400 100
1 1/4 1.375 ±.003 1.105 0.125 ±0.020 400 100
1 1/2 1.625 ±.004 1.309 0.148 ±0.020 400 100
2 2.125 ±.004 1.716 0.193 ±0.023 400 100

Downloads