バルブサイズのツール

お客様に適した圧力調整器のサイズをご確認いただけます。
バルブタイプを選択し、適した範囲で作動する異なるバルブサイズをお選びいただけます。

作用点が黄色のマークがされましたら、更に小さなサイズのバルブをご選択ください。

作用点がグラフにない場合は、選択した流量がバルブの範囲内か、また圧力範囲内かをご確認ください。

gfps_tool_DHV_icons
gfps_tool_DHV_icons
gfps_tool_DRV_icons

Valve Information

Reducing Valve Type 582: Reduces a higher inlet pressure to a defined constant outlet pressure.
Retaining Valve Type 586: Maintains a constant inlet pressure at fluctuating system pressure
Select the dimension you would use for the valve to match the pipe without any reductions.
Standard Set Range is 0.5 - 9 bar (7-130 psi). For more sensitivity in lower pressure ranges select 0.3 - 3 bar (4-44 psi).
Select between metric or imperial system.

Performance Data

bar
Please type the required set pressure. Depending on Valve type P1 or P2. If a pressure retaining valve should open at a specific pressure, type this pressure here and select 0 for flow below.
bar
Please type the required set pressure. Depending on Valve type P1 or P2. If a pressure retaining valve should open at a specific pressure, type this pressure here and select 0 for flow below.
l/h
Please type in the flow value that will occur at the required set pressure. Changes in flowrate will result in a shift of the operating point on the flow curve which will lead to changes of the set pressure.

Print

Valve Dimension

16DN10 (3/8")
63DN50 (2")
Select valve size here. If the operating point in the graph is in the orange zone you can play around with smaller valve sizes. Smaller valve sizes will move the operating point to the right, bigger valve sizes to the left

お問い合わせ

Global Sales Support
GF Piping Systems
Ebnatstrasse 111
8201 Schaffhausen
スイス

gss #at# georgfischer dot com

お使いの素材の耐薬品性

お使いの素材の耐薬品性
様々な素材の耐薬品性に関する重要な情報をご確認ください。
当社のオンラインツールを使って、耐薬品性を調べることができます。

流量計

流量計のご使用で流速、流量、圧力喪失を測定することができます。

Start calculating